Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L

FAQ within [ FAQ: BB_HCM3xxcameras ]

1-10 of Total 22

1 / 3page
  • I forgot the administrator password.

    Press the FACTORY DEFAULT RESET button to reset the camera. All settings will be erased and reset to their default values. Refer to the Setup Guide and set up the camera again.

    • No:2969
    • 公開日時:2013/04/10 15:00
  • I forgot camera's IP address and port number.

    Start the setup program, then click [Search for Cameras] to display a list of cameras. Find the IP address and Port No. on the list. If you have more than one camera, you can distinguish cameras by...

    • No:2970
    • 公開日時:2013/04/10 15:00
  • How can you find out the IP address and port number of the camera?

    By using setup software in CD-ROM, you can display connected camera's IP address and port number. You can compare the MAC address in this screen to the MAC address on the camera.

    • No:2943
    • 公開日時:2013/04/10 15:00
  • How can you find out the ID and password to access the setup screen?

    There is no way to know the registered ID and password, therefore, push "clear setting button", then configure from beginning.

    • No:2942
    • 公開日時:2013/04/10 15:00
  • Can you view motion images on a cell phone?

    No. Only JPEG format still image can be viewed.

    • No:2976
    • 公開日時:2013/04/10 15:00
  • How much is the setup cost for the BB-HCM3xx cameras?

    The setup cost depends on the conditions of your network, system, etc. Consult your vendor for each setup.

    • No:2913
    • 公開日時:2013/04/10 15:00
  • What is the audio specification?

    The audio communication is the 2-way half duplex. The audio compression is G.726 as ADPCM 32kbps. The hearing range is within about 5 m from the external microphone in a quiet place. The voice dela...

    • No:2902
    • 公開日時:2013/04/10 15:00
  • What is 2-way audio communication?

    Use the built-in Mic or the separately purchased Mic and a commercially available speaker with amp to speak back and forth. This lets you exchange information with walkie-talkie type communication.

    • No:2900
    • 公開日時:2013/04/10 15:00
  • What is the motion detection feature?

    -The camera's motion detection feature allows you to buffer or transfer camera images when the camera detects motion.-Motion detection threshold and sensitivity can be adjusted. Understanding how t...

    • No:2899
    • 公開日時:2013/04/10 15:00
  • Only half of the image is displayed with Internet Explorer.

    Your Internet Explorer is out of date.Upgrade to Internet Explorer 6.0 or later.

    • No:2968
    • 公開日時:2013/04/10 15:00

1-10 of Total 22