Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L

FAQ within [ Setup: IPsec VPN ]

1-4 of Total 4

1 / 1page
  • E-mail or FTP transfer cannot be performed in transport mode.

    [Cause1]The network settings are not set correctly.[Solution1]Cancel the IPsec settings on the server, PC and camera, and check that camera images can be transferred. If they can be transferred, th...

    • No:2977
    • 公開日時:2013/04/10 15:00
  • The camera cannot be accessed in tunnel mode.

    [Cause1]The pre-shared key is not set correctly.[Solution1]Set the same pre-shared key for the camera and the VPN router.[Cause2]The VPN router is not set correctly.[Solution2]Set the IKE and IPsec...

    • No:2979
    • 公開日時:2013/04/10 15:00
  • The camera cannot be accessed in transport mode.

    [Cause1]IPSec policy settings are restricted.[Solution1]Decrease the number of computers connected simultaneously, and waits for a moment, or shorten the lifetime in the PC's IPSec settings.[Cause2...

    • No:2978
    • 公開日時:2013/04/10 15:00
  • The camera cannot be accessed by IPv6.

    [[Cause1] The camera is not configured for IPv6 correctly.[Solution1] Refer to the [Network (IPv6)] column on the [Status] page, and check if IP address and default router is correct. [Cause2] IPSe...

    • No:2954
    • 公開日時:2013/04/10 15:00

1-4 of Total 4