Panasonic ideas for life Global


  • Font Size
  • S
  • M
  • L
  • No : 2884
  • 公開日時 : 2013/04/10 15:00
  • Print

You cannot set up the camera manually.


  • The IP addresses " -" and the port numbers "60001 - 60016" are used for the Automatic Setup function. If you use the corresponding IP addresses or port numbers, change to the other IP addresses or port numbers.

  • To set up the specific Network Camera manually, clear Enable check box on the Network window of Network Camera ([Network] ->1. Network Configuration from the Setup Program).
    When you set up your Network Camera manually, the KX-HGW600 needs the settings on the Screen Assignment window and Port Forwarding window.

Was this FAQ helpful to you?