Panasonic ideas for life Global


  • Font Size
  • S
  • M
  • L
  • No : 2890
  • 公開日時 : 2013/04/10 15:00
  • Print

The wireless device cannot be connected.

Category : 


  1. [Cause1]
    Check the PC wireless LAN card's communication mode to Infrastructure. The device-specific SSID and 128-bit encryption key are set in factory default. The default SSID and 128 bit encryption key are displayed on the rear of this product.
    Set the same SSID and 128-bit encryption key as those on the wireless devices connected to this product.

  2. [Cause2]
    Is the wireless network mode set to "802.11a" on the wireless device?
    Set the wireless network mode to 802.11b or 802.11g.

  3. [Cause3]
    It is possible that this product or the wireless device may be out of range, or there is a wall or other obstacle in between them.
    [Solution3] Move them closer together.

  4. [Note:]
    If you will operate this product in the repeater mode, restart the wireless device after this product and BB-HGW700 were turned on.
    If you will not use BB-HGW700 and/or use other router, you can operate this product in the access point mode.
    If the network configuration was changed, for example the connection between the device and this product was changed form wireless LAN to fixed LAN, restart this product.

Was this FAQ helpful to you?