Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L
  • No : 2945
  • 公開日時 : 2013/04/10 15:00
  • Print

Camera setup failed using setup software.

Answer

20 min or more passed after power on.
-> Remove power, then power on again. Start setup from beginning.

Duplicate IP address of camera.
-> Power on and configure camera one by one.

Some network error occurred.
-> To check network configuration, then setup camera again from beginning after power off and on.

Was this FAQ helpful to you?