Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L
  • No : 2971
  • 公開日時 : 2013/04/10 15:00
  • Print

UPnP<SUP>TM</SUP> port forwarding setup fails.

Answer

[Cause1]
Your router's UPnP feature is disabled.
[Solution1]
Refer to the operating instructions included with your router and enable UPnP.

[Cause2]
The camera was turned on before the router was turned on.
[Solution2]
Turn the router on first, and then turn the camera on.

[Cause3]
The camera's [Default Gateway] setting is not set or is incorrect.
[Solution3]
Confirm the [Default Gateway] setting and set it up correctly.

[Cause4]
Your router does not support UPnP.
[Solution4]
Refer to the operating instructions included with your router and set up UPnP? manually in order to access the camera from the Internet.

Was this FAQ helpful to you?