Panasonic ideas for life Global


  • Font Size
  • S
  • M
  • L
  • No : 3053
  • 公開日時 : 2013/04/10 15:00
  • Print

How does the indicator on the BL-C10A indicate the camera's status?

Category : 


The following chart explains the status of the camera as shown by the indicator (LED).
LED color LED status Possible cause Possible solution
-- Off The incorrect AC adaptor is connected to the camera. Make sure to use the included AC adaptor.
The indicator is turned off. To indicate camera status using the indicator, turn on the indicator using "Indicator Control".
Orange Orange on or orange flashing (after camera is turned on)
The Ethernet cable is not connected properly. Make sure the cable is connected.
The user-supplied hub or broadband router is not functioning properly. Make sure the user-supplied hub or broadband router is functioning properly.
Orange flashing While upgrading the camera's firmware, you unplugged the AC adaptor before the upgrade was finished. Access the camera again with a web browser, then follow the on-screen instructions under "Update Firmware" and update the firmware.
Orange flashing (2 second intervals) The broadband router is turned off. Turn the broadband router on and wait for the Internet connection to be re-established.
There was a UPnP port refresh error. Repeat the "Automatic Setup" procedure described in the Getting Started manual. If the problem still exists, refer to the documentation included with your broadband router and configure the broadband router's port forwarding feature.
Orange on The Ethernet cable is not connected or the camera is not connected to the LAN (Local Area Network). Make sure the cable is connected.
Green Green flashing Automatic setup did not finish correctly. Refer to the Getting Started manual and complete the setup procedure.
The camera could not obtain an IP address from the DHCP server. When "Automatic Setup" or "DHCP" is selected as the connection mode, something may be prohibiting the camera from obtaining an IP address from the DHCP server. Consult your network administrator or service provider.
Green on (Normaloperation) .
Red Red flashing The camera may be malfunctioning. Please contact the place of purchase.
Red on Privacy mode is turned on. To turn off privacy mode, press the privacy button on the front of the camera, or access the camera as an administrator and turn off privacy mode remotely.

Was this FAQ helpful to you?